Gibt an, welche Bestätigungen gesendet werden sollen [ nur UCP Funktion 51, CIMD, SMPP und OIS ].
Folgende Wert sind in UCP, CIMD und OIS für <n> zulässig:
www.bai.deNotificationType = Specifies which notifications should be sent [ only UCP function 51, CIMD, SMPP and OIS ].
Following values will be accepted for UCP, OIS and CIMD for <n>:
www.bai.deAtOverEthernet = Gibt an, dass das Gerät per IP angesprochen wird.
Als Parameterwert kann entweder TCP, UCP oder Telnet angegeben werden.
Baud=4800 Gibt die zu verwendende Baudrate an (300, 600, 1200, 2400, 4800 oder 9600).
www.bai.deAtOverEthernet = Specifies that the device will be accessed over IP.
Valid parameter values are TCP, UDP or Telnet.
Baud=4800 Specifies the baud rate (300, 600, 1200, 2400, 4800 or 9600).
www.bai.deDieser Wert muss größer als der ProtocolTimeout sein ( nur ab Professional-Edition ).
NotificationAddress= Gibt eine Adresse an, an die die SMSC eine Bestätigung senden soll [nur UCP Funktion 51;
nicht in Standard-Edition].
www.bai.deThe value for that parameter has to be higher then the value for ProtocolTimeout ( only in Professional-Edition and higher ).
NotificationAddress= Specifies the address to which the SMSC should send notifications [only UCP function 51;
not with Standard-Edition].
www.bai.deDeseja acrescentar uma palavra, uma frase ou uma tradução?
Envie-nos uma nova entrada.